Please read EVERYTHING below and double check your pump's hose size for compatibility; you may need a different connector kit
☝️ Note: You can also order from Amazon here.
Free shipping included!
Designed just for Stock Tank Pools! If the Intex inlet strainer connector parts for 1-1/2" hoses are out of stock, try this strainer kit! Swimmly designed a new inlet strainer kit with improved features. This threaded inlet strainer connector is designed to fit Intex and Bestway filter pump systems which use threaded 1-1/2" hoses (see this kit for 1-1/4" hoses). This kit also works perfectly with Intex plunger valves for 1-1/2" hoses too! Kit includes the following:
Threaded strainer connector
Flat rubber washer
Threaded strainer nut
This kit works with the following Intex filter pumps (which have 1-1/2" diameter hoses):
Intex 1,500 GPH Cartridge Filter Pump (Model 635T)
Intex 2,500 GPH Cartridge Filter Pump (Model 633T)
Intex 10" Sand Filter Pump (Model SF90110-1)
Intex 12" Sand Filter Pump (Model SF80110-2)
Intex 14" Sand Filter Pump (Model SF70110-2)
Intex 16" Sand Filter Pump
If you have one of the following filter pumps (which have 1-1/4" hoses) order the 1-1/4" connector kit instead:
Intex 330 GPH Cartridge Filter Pump (Model 601)
Intex 530 GPH Cartridge Filter Pump (Model 603)
Intex 1,000 GPH Cartridge Filter Pump (Model 637R)
The following modifications were made improve the design:
Less bulky, lower-profile design compared to traditional parts
Made from high-quality and durable Nylon 12 plastic; excellent resistance to UV and chlorine
Our flat rubber washer uses a softer rubber compound in order to create better seal against stock tanks
Why is this expensive? Because this part is rapid injection molded (to deliver quickly) it is more expensive than the Intex part. Intex is currently sold out of strainer parts (as of April 2021), so this is the only option we're aware of.
Guarantee: If the strainer connector, strainer nut, or rubber washer fail under normal use, we will send you a replacement at no additional cost! If you have any issues with the strainer, email firstname.lastname@example.org. Please see our full refund and return policy for more.
Shipping: Free standard shipping included (1-2 weeks). Want it faster? Choose from expedited (3-5 days).
Intex Equivalent Parts
This combo replaces the Intex threaded inlet strainer connector, strainer nut, and rubber washer for 1-1/2" threaded hose fittings:
This made my installation easy. I had tried other parts and failed. This is the one!
It was so easy to install. It fit perfectly and now I have a stock tank pool ready to use for summer.
I used plumber tape and silicone caulking to help prevent any leaks. Overall great product. Now to see if it lasts!
We were so surprised that the Intex sand filter pump didn't come with a strainer grid which is essential to finish setting up the pool pump. We were so happy that Stock Tank Pools had this connection available and were able to ship it out quickly so we received it prior to our short term renter coming in. We thank them so much for that!!!! The only reason I didn't give it a 5 star rating is because when we tighten the connection, it comes loose so we never feel like we can get it tight enough, even though thankfully there isn't a leak. As long as no renter messes with it, the connection should work properly but we are a little concerned since we can't tighten the connection where it will stop (it just slips off). Thanks again for helping us complete the set up of the sand filter pump with providing the strainer grid!!!! We couldn't have done it without you!
Hi I cannot write a review about the kit as I have not recieved it yet.
Hello, Cherie! I'm very sorry about the delay! It looks like USPS has been delayed delivering your kit to Canada. Tracking says it is in Vancouver now, so hopefully it should be delivered to you very soon.
Just what we needed!! Priced right and timely!!
Thank you, Wendy! We hope you enjoy your new stock tank pool!