
IMPORTANT: Please read EVERYTHING below. You must measure your tank's diameter with a tape measure before ordering.
Give Your Rusty Stock Tank a Glow-Up with Our Heavy-Duty Liners!
Who are these liners for? Oh, just the stock tank owners who refuse to give up on their beloved (but rusty, leaky, or corroded) tank dreams. If you’re ready to patch things up and don’t mind a little extra material, these liners are basically the tank equivalent of a second chance at love. 💙
What to Expect:
Sizing Magic: These heavy-duty liners come with a little extra wiggle room (think comfy sweatpants for your stock tank). They’ll fit, they’ll hold water, and they’ll transform your rusty bucket into a pool party MVP.
No Stretch, No Stress: They don’t stretch (sorry, no tank yoga here), but we make them slightly bigger so you won’t have a tight squeeze situation. Just measure the inside diameter of your tank (bottom seam!) and round up if you’re between sizes. Too small? Send it back (just don’t cut or modify it first).
About the Liners:
Made from 2X thicker PVC vinyl than your average above-ground pool liner (because your tank deserves the VIP treatment).
UV- and tear-resistant—perfect for sunshine and rowdy splash sessions.
Chlorine-friendly (but don’t let those chlorine tablets touch the liner directly unless you enjoy instant fade vibes).
Available in the classic Sky Blue color, perfect for galvanized round tanks. Sorry, poly and oval tank fans—this one’s not for you.
Important Notes (aka Things You Should Know):
1. Measure twice, order once. Get that bottom seam diameter locked in and round up if needed.
2. Folds are normal. Think of it as your tank rocking a chic, draped look—it’s called fashion, sweetie.
3. Chlorinate responsibly. Overdoing it on chlorine may fade the liner, so stick with recommended levels and keep those tablets in a floater, not chilling on the liner like a beach towel.
Why Wait?
Your rusty stock tank isn’t going to fix itself. Order now, and in just 3–4 weeks, you’ll have a liner that keeps the water in and the backyard vibes immaculate. Let’s keep the splash alive! 🌊
Sizing
Every stock tank has a slightly different diameter, so your liner will be custom made to fit your tank based on the measurement you provide above. Before placing your order, use a tape measure to determine the exact inside diameter of your tank. Measure along on the floor of your tank from wall to wall, and ROUND UP to the nearest inch. Note: due to the reinforced material we use, these liners do not stretch. Therefore, we manufacturer them slightly larger than your tank's diameter to ensure they fit. In other words, if the liner is a 1/2" too small it will *not* fit your tank (better to be an inch larger than an inch smaller!). Because of this, the liner may have a small amount of additional material, resulting in a few folds.
Shipping
FREE STANDARD SHIPPING INCLUDED! Since your liner will be custom-made for your tank, please allow 3-4 weeks for delivery from our manufacturer.
Guarantee
We guarantee the liner to be free of any manufacturing defects. However, you must test the liner before cutting holes in it for the pump's fittings. Once you cut it, we cannot guarantee it. That said, these liners are easily repairable with a PVC liner repair kit.
Refunds / Returns
Because liners are custom-made for your tank, we cannot accept refunds or returns. Once you place your order, it cannot be cancelled.
How to: Installation Steps
Note: installation is best done on a sunny day (without rain). Sun and warm temps make these liners easier to manipulate.
- Prior to installing the liner, your tank must be clean and completely dry. Use a pump or hose to siphon it, then use a towel to completely dry the tank (do not install the liner on a rainy day). Be sure to vacuum any pebbles, debris, sand, etc. so there's nothing between the liner and tank.
- Remove all fittings, including the drain plug and inlet / outlet (if applicable).
- Unpack and unfold your liner from the box and visually inspect it. (Tip: leave it inside or in the sun to warm up, this makes it easier to handle and manipulate.)
- Place the liner in your clean and dry stock tank. Push the liner into the corners of the tank to ensure proper fit. Roll the liner's edge over the top rim of your tank (see photos). You may need two people to stretch the liner over the rim.
- If you've drilled holes in your tank for fittings, next you'll need to cut holes in the liner to match those in your tank. Use a sharp utility knife to cut holes in your liner which match the existing holes in your tank. Replace fittings and tighten. NOTE: be sure flat rubber washer is between the fitting and the liner.
- Fill your tank and enjoy!